|
Type |
Emulsion |
Application |
Cut Tap |
Roll Form Tap |
Broaching |
Drill Mill Ream |
Double Disc Grinding |
Centerless Grinding |
Factor |
POWR-CUT AL |
High oil semi-synthetic for
aluminum application |
Milky |
Machining and grinding of
Aluminum, Steel and Cast iron |
X |
X |
X |
X |
|
|
1.00 |
POWR-CUT HD |
Medium oil semi-synthetic general
purpose |
Clear to slightly hazy |
Heavy duty machining and grinding
of steel, cast iron and some
aluminum |
X |
|
X |
X |
X |
X |
1.50 |
POWR-CUT 490SO |
General purpose chlorinated
soluble oil with excellent
bio-control |
Milky |
General purpose machining of steel
and cast iron |
X |
|
X |
X |
|
X |
1.00 |
POWR-CUT 790HD |
Heavy duty synthetic fluid for
grinding and machining steel |
Clear |
Heavy duty machining and grinding
of steel and cast iron |
X |
|
X |
X |
X |
X |
2.75 |
POWR-CUT TS |
General purpose synthetic fluid |
Clear |
General purpose grinding and
machining of steel and cast iron |
X |
|
|
X |
X |
|
2.50 |
POWR-CUT MIST 100
|
Straight oil misting lubricant |
Insoluble |
Straight oil misting operation |
X |
X |
X |
X |
|
|
NA |
POWR-CUT MIST 32
|
Water
soluble synthetic misting
lubricant |
Clear |
Water
soluble misting operation |
X |
X |
X |
X |
|
|
2.75 |
POWR-CUT AL
provides a performance edge for those
cutting and grinding applications that
demand extra physical lubrication and
long sump life. This heavy duty fluid
delivers measurable tool life
improvement and longer sump life even
under the most demanding of
applications. POWR-CUT AL provides
trouble-free performance. The light,
soft, transparent film left on parts
and equipment provides excellent
corrosion protection and lubrication
for machine equipment. Other key
benefits of POWR-CUT AL are its hard
water stability and oil-rejecting
capabilities.
POWR-CUT HD
is a sulfonate free, bio-stable
semi-synthetic cutting fluid capable
of machining high alloy and stainless
steel or other difficult non-ferrous
and ferrous metals. The unique
performance package produces excellent
finishes on a wide range of materials
with very low consumption. Other key
benefits of POWR-CUT HD are its hard
water stability and oil-rejecting
capabilities.
POWR-CUT TS
is an oil rejecting synthetic cutting
fluid formulated for general purpose
ferrous and non-ferrous machining and
grinding applications. POWR-CUT TS�s
unique formulation provides superior
oil rejecting properties, corrosion
protection, hard water stability and
low foam generation even in DI water.
POWR-CUT 790HD
is a high performance, oil rejecting
synthetic cutting fluid formulated for
the most severe ferrous applications.
POWR-CUT 790HD is designed to
outperform EP-fortified soluble oils
and semi synthetics in most
applications.
POWR-CUT MIST
100
is a safe environment friendly micro
misting lubricant. When used it forms
a invisible monomolecular layer on the
tool surface to effectively reducing
frictional heat that extends tool life
and reduces heat distortion. Because
it is used at only a few ounces per
nozzle in a eight-hour shift there is
no waste material to dispose of and no
sump to go rancid.
POWR-CUT MIST 32
is a safe environment friendly micro
misting lubricant. This product
contains synthetic surfactants, polar
lubricating agents, synthetic rust
preventatives, and special soaps to
provide and OIL FREE synthetic with
superior lubrication, cooling and
performance properties.
POWR-CUT 450SO
provides a performance edge for those
difficult cutting applications that
demand extra physical lubrication and
long sump life. This highly
chlorinated fluid delivers measurable
tool life improvements and longer sump
life even under the most demanding of
applications.
For more information on Bio-stable
Coolants E-Mail us at
info@pcchemical.com
|